Price: $69.23
(as of Jul 05, 2024 09:52:53 UTC – Details)
This product is a control system.
Frequently asked questions:
(1) It is necessary to ensure that the connection between the motor and the controller is firmly connected to the machine.
(2) The installation distance of the pedal assist device is approximately 5mm.
(3) Ensure that the inner core of each plug is not damaged/broken/bent.
(4) The wiring between the controller end and the motor end must be tightly connected
Packaging list:
1.30A controller
2 LCD S866 monitor
3Twist throttle
4 PAS
5Motor Convert Extension Cable
Simple troubleshooting methods for error codes:
E07 motor malfunction, it is usually necessary to check if the cable sequence of the motor and controller is consistent (if the motor is not connected, E07 errors may also occur)
E08 throttle malfunction. Generally speaking, it is necessary to check if the throttle connector is properly connected (if the throttle is not connected, an 08 error may also occur). General parameter settings:
P03: Adjust voltage, 24V/36V/48V
P06: Wheel diameter size setting, in inchesquality of the products. The products shown to you are all high-quality products that have passed market tests.
If you have questions and difficulties about our conversion kit, you can contact our store’s customer service, you will enjoy the high-quality service guided by the factory: professional product knowledge and sufficient practical experience can help you solve all problems.
Please rest assured, I will provide you with one-year warranty service and three-year related product recommendation help.
Please note that our warranty does not include:
1. In normal use of this product, the slight scratches, traces or stains will not be affected;
2. Damage caused by human factors: such as violent use, unauthorized disassembly, etc.;
3. Damage caused by external factors: such as traffic accidents and other force majeure factors;
1.Control system: This is a MQ control system. This system has been tested and can be used normally. Please do not replace accessories. If you want to replace it, please contact the store’s customer service. We cannot guarantee that the accessory you want to replace matches our controller. (no battery and motor).
2. Plugs: The plug has a certain waterproof ability, not easy to wear, and very durable. Please ensure that all plugs are inserted tightly when installing.
3.Display: The display in this kit is JN-S866, the volume of the display is 80mm*48mm*48mm (3.15*1.88*1.88in),suitable for 24V36V48V controller. The bottom of the monitor is equipped with a bracket, which can be fixed on the handlebar. The diameter of the handle is 22.5mm
4. Controller: This kit uses MQ-30A controller. The volume is: 145*60*36mm (5.7*2.36*1.41in), the plug of the pedal assist sensor is a 3PIN plug, and the PAS used is KT-BZ-4(8); the power plug is XT-60;A 3PIN plug to connect the thumb throttle,suitable for 750W/1000W motor。The controller has 3 modes (sine wave, square wave, no Hall mode) to drive; The self-learning function is used to automatically apply the direction (self-learning can be carried out when two plugs are plugged in)
5.Motor Convert Extension Cable: One end is connected to the controller, and the other end is connected to the motor (female), perfectly solving the connection problem between ordinary socket controllers and motor waterproof heads. The controller end consists of 3 to bit lines and 6 Hall signal lines