Price: $6.39
(as of Sep 14, 2024 19:12:50 UTC – Details)

Product Attributes:
– Color: Black
– Material: ABS resin, pure copper wire
– Packaging: Car booster x 1 + strong adhesive x 1 + quick connector x 1 + cable clamp x 2
– Application: Support car FM/AM reception, increase the receiving distance, and enhance the sensitivity of weak signals.
– Compatible With: For Motor Vehicles Pickup carts Boats Motorcycles Truck SUV
Installation: The car radio is very easy to install. It can be installed in three minutes without additional tools
Product Features:
– Waterproof and dustproof, with long service life.
– Reduce noise, and provide high-quality and clear radio reception.
– Adopting MMIC low noise device design, the signal is more stable and the sensitivity is higher.
– Adopting a low insertion loss dedicated IC design, it is inserted in a straight through state.
Product Parameters:
– Frequency range: 88-108MHZ 170-240MHZ 1452-1492MHZ
– Gain during amplification: 22±3db
– Output impedance:75Ω
– Standing wave ratio: ≤2.5
– Noise coefficient: ≤2db
– Maximum output level: 108dBuV
– Supply voltage: DC+12~24V
– Working current: ≥50ma
Reduce Noise: Amplifier is made of copper wire, strong anti-interference, providing better signal and reduce the noise. Creating a more comfortable driving atmosphere for you.
Installation: Quick installation without tools, you just Install the amplifier behind the car audio system. Connect the socket, then the amplifier to the radio hole of the car CD or DVD. Finally, connect the power cord to the original vehicle’s ACC for power supply.
Waterproof and Dustproof: It is equipped with high-quality waterproof inserts and waterproof covers. Provides all-round protection.
Compatible with All Car Models: This car radio booster has a voltage of 12V. Compatible with 99% of vehicle models, such as cars, vans, trucks, RVs, SUVs, etc.
You Will Receive: Car booster x 1+ strong adhesive x 1 + quick connector x 1 + cable clamp x 2. Eliminate the problem of caused by poor contact for a long time. Ensure security operation.

Price: $6.99
(as of Sep 14, 2024 18:47:06 UTC – Details)

Specifications :
Material: Metal, Carbon Fiber
Color: Black, Silver, Red, Blue
Product Size: 0.6*1.37 inch
Package Size: 1.57*0.79*0.79 inch
Weight: 24g
Package includes: 1 * Car Short Antenna, 4 * Screws, 2 * Pads

Features:
– Replaces for stock mast/whip antenna.
– Functional and intended for AM/FM radio signal, do not compatible with satellite radio and GPS system.
– Easy screw-on installation with no modification, cutting, or drilling.

Note:
Manual measurement, size allow slight error.
Please check the compatibility of the short antenna before ordering.
【High Quality Material】: This car antenna is made of high-quality metal and carbon fiber material, which is durable, not easy to age and wear-resistant, ensuring maximum strength and durability for long-term use without deformation or fading.
【Function】: Car short antenna cover has AM/FM radio signal. Not only for the signal function, the signal is stable and strong. But also for decoration of your car roof. The antenna mast is made of premium quality material which can be used in extreme environments. There is no need to worry about the antenna breaking when washing the car.
【Easy to Install】: Our car short antenna is very easy to install. Just plug and play. Unscrew the old antenna, and choose the appropriate screws for your car, then screw the new antenna right into the existing roof mount or antenna base. Package include: 1 x 1.37 inch radio antenna, 4 x screws, 2 x pads.
【Fashionable Decoration】: The antenna topper cover is more beautiful and fashionable, and immediately improves the grade of your car. Cooler and sportier than the original car, the unique carbon fiber design make it more beautiful for your vehicle.
【Widely Applicable】: This universal car short antenna is suitable for most cars on the market. It is not only suitable for flat roofs but also for curved roofs. (To ensure proper installation and use after purchase, please check the size of your car’s antenna base before placing your order.)

Price: $7.99
(as of Sep 14, 2024 18:23:10 UTC – Details)

Specifications:
Material: Hardware+ABS+PC+Silicone
Color: Carbon Fiber Black, Black, Gray
Size: 4.5 x 2 Inches
Weight: 115g
Package Include: 1 x Car Phone Mount
Features:
The bracket is installed in the position of the air outlet, which will not block the windshield and affect the line of sight, ensuring your driving safety.
Three-point support, very stable, no need to worry about dropping the phone when braking sharply on bumpy roads.
Metal hook fixed installation, clamped on the air outlet blade, suitable for a variety of horizontal, vertical and oblique air outlets.
【Ideal Viewing Angle】: The 360° rotating and turning ball joint can be adjusted to any viewing angle, and you can rotate and adjust it at will. Effectively free your hands so you can focus more on driving. With it, it is very convenient whether you are answering the phone, watching navigation, or watching a movie during a break.
【Wide Application】: The holder is 4.5 inches long, 2 inches wide, and 4.3 inches wide with the clamp arms on both sides open. The bottom of the phone holder has a support frame that can be stretched, which makes it suitable for almost all smartphones. (Support clip width is 1.4 inches)
【Reliable Material】: Made of excellent hardware + ABS + PC + silicone, the shell is smooth and does not hurt your hands. The air outlet fixing clip is made of hard metal to ensure a solid installation. The clip arms on both sides have a thick layer of silicone to protect your smartphone from wear and tear.
【Solid Installation】: Turn the bottom knob counterclockwise to rotate the metal hook out until the right length (the retractable gap of the hook is 0.27-1.26 inches). Then snap on the car air outlet, and then turn the knob clockwise to retract the hook until it is tightly fixed.
【Easy to Use】: Simple operation, easy to pick and place in one second. Press the small buttons on both sides of the bracket to unlock the bracket, open the clip arm and put in the phone. (Buttons can be pressed at the same time, or press either side alone.) The bottom pre-charging port, not blocking the charging head.

Price: $7.99
(as of Sep 14, 2024 17:59:27 UTC – Details)

Flygun 1 PC Car Dashboard Mobile Phone Holder, 360° Rotatable Mobile Phone Holder, Non-slip Center Console Desktop Navigation Holder Compatible iPhone Smartphones, Universal for Car Home (Black)
Silicone Rubber Material: This car dashboard phone holder is made of wear-resistant silicone rubber material, which can provide stable support for the phone and withstand daily wear and tear without breaking easily. Overall smooth and burr-free, excellent workmanship, easy to clean.
360-degree Rotation: The bottom support surface of this mobile phone holder can rotate 360 degrees, adjust the appropriate angle according to your own needs, and freely switch between horizontal or vertical placement without affecting the power supply of the mobile phone.
Anti-slip and Stable: Put the mobile phone into the holder, and the protective wings like wings on the front and rear can firmly fix the mobile phone. Even when driving on bumpy roads, emergency braking, etc., the mobile phone will not fall easily. The excellent adhesive on the bottom will allow the bracket to adhere tightly to the surface of the car’s dashboard.
Size Details: The overall dimensions of this phone mount are 1.69″ x 2.83″. It is suitable for mobile phones with a thickness of 0.27-0.43″, including iPhone15, iPhone15 Pro, GPS devices, etc. Based on the ergonomic tilt design, it provides the driver with a perfect navigation and driving angle without blocking the driving view.
Widely Compatible: This mobile phone holder is suitable for most car interior accessories, and can also be placed on most smooth surfaces such as office desks and living rooms. The bottom of the product comes with adhesive, so you can stick it directly.

Price: $5.79
(as of Sep 14, 2024 17:35:54 UTC – Details)

Specifications:

Material: PVC
Size: 18cm x 1.6cm
Colour: black
Packing List:
4 x Car Concealed Wire Sleeve

NOTE:
Wipe the oil, dust, and protective agent at the pasting position with a cleaning agent.
To ensure stable viscosity, do not apply external force to the wire sleeve within 24 hours after pasting.
Excellent Material – This automobile wire sleeve is made of high-quality PVC material, soft, and wear-resistant, not easy to break, long service life.
Function – This car wire cover can arrange various lines, such as data lines, navigator lines and various connector point lines, you can say goodbye to the messy interior environment, and prevent accidents.
Easy To Install – You only need to tear off the double-sided tape on the back, pass the data cable through the groove on the back of the product place it in the appropriate position.
SIZE – Concealed wire sleeve size is 18cm x 1.6cm(7 inches x 0.6 inches). You can cut the soft cable cover according to your actual needs.
Suitable – Our product is suitable for car recorder, GPS, car charger and other data cables with a diameter of up to 5 mm.

Price: $26.49
(as of Sep 14, 2024 17:11:57 UTC – Details)

Irinidig 1 PC Car 2-in-1 Cup Holder Mobile Phone Holder, 11.14″ x 5.51″ Center Control Cup Holder Non-slip Base, Rotatable and Adjustable Clamp Arm for 4″-11″ Cell Phones, Universal for Cars (Black)
Two-in-one Design: This product combines the cup holder and the mobile phone holder. By increasing the height of the original cup holder of the car, a new cup holder and a visually elevated mobile phone holder are created, saving more space in the car. The whole is made of ABS material, which is light, durable and not easy to deform.
Automatic Clamping Cup Holder: The cup holder uses an automatic clamping device, which can automatically clamp the cup when it is placed in the cup. The strong clamping force will not let the objects in the cup spill. Suitable for thick cups, thin cups, long bottles, coffee, beverages, ashtrays, etc. with a diameter of less than 3.39″.
Mobile Phone Holder: The mobile phone holder can rotate 360 ​​degrees freely to get the viewing angle you need, suitable for 4″- 11″ mobile phones, GPS and other devices. The clamp arm fully wraps the phone to provide bump protection.
Stability: The support rod of the mobile phone holder is made of alloy material, with strong load-bearing capacity, and can be raised and lowered freely, effectively reducing the shaking of the mobile phone during driving. The cup holder can also rotate 360 ​​degrees freely, making it more flexible to use.
Easy to Install: The bottom of the product can be directly inserted into the original cup holder of the car, and the bottom has an adjustment plug side wall to ensure a close fit with the car cup holder and reduce the shaking of the cup body during driving. The installation is simple and convenient. Fits cars with cup holder diameters of 2.44″-3.38″.